Residential & Commercial Pressure Washing Services

Green film on the north wall and gray mildew under the eaves are the most common calls we get. Our house washing uses a soft wash, a low-pressure rinse with a cleaning solution that kills algae and mildew at the root instead of just knocking it loose. Because nothing is blasted, water stays out from behind your siding and the clean lasts much longer.

• Full exterior wash, ground to roofline
• Soffits, fascia and trim included
• Plants wet down before and after
• Windows rinsed spot free

Your driveway is the first thing guests see, and in Eastern NC it collects black mildew, tire marks, pine sap and oil drips fast. Driveway pressure washing with a rotary surface cleaner gives an even finish with no wand stripes, then we post-treat to slow mildew from coming back in shaded spots.

• Rotary surface cleaner, no stripes
• Oil and rust spot treatment
• Edges and expansion joints cleaned
• Post-treatment for mildew

Shaded walkways turn green and slick, which is a real slip risk after a rain. Sidewalk and walkway cleaning removes algae, moss and dirt from the joints and surface so the path to your front door looks clean and feels safe underfoot again.

• Front walks and side paths
• Moss and algae removed from joints
• Stepping stones and pavers
• Slip risk reduced after rain

Patios, garage aprons, carports and slabs all darken with time. Concrete cleaning at the right pressure lifts dirt, mildew and many stains without etching the surface or exposing the stone. For rust, oil and fertilizer marks we use a stain-specific treatment, because more pressure alone does not remove them.

• Patios, slabs and garage aprons
• Rust and fertilizer stain removal
• Oil spot degreasing
• Even finish with a surface cleaner

Pine pollen, shade and humidity leave decks gray, green and slippery. Deck and patio cleaning at low pressure lifts that weathered layer without fuzzing the wood grain, and composite boards get a gentle wash that will not void the manufacturer warranty. A clean deck is also the right first step before new stain.

• Wood and composite decks
• Railings, stairs and lattice
• Pavers and stone patios
• Ready for stain or sealer

A Southern porch gets used hard. Porch cleaning removes pollen, spider webs, wasp nests and mildew from the floor, ceiling, columns and railings, so it is ready for rocking chairs again. We keep pressure low on painted ceilings and trim to protect the finish.

• Floors, ceilings and columns
• Spider webs and nests removed
• Painted surfaces protected
• Screened porch frames rinsed

A fence frames the whole yard, so green or gray boards stand out. Vinyl fence cleaning lifts the green film that grows on the shady side, and wood fence cleaning removes weathering at low pressure so the boards do not splinter. Both sides are cleaned so the fence looks even from end to end.

• Vinyl, wood and composite fences
• Both sides of the fence
• Gates, posts and caps
• Ready for stain on wood

Vinyl is the most common siding in Eastern NC, and it shows algae fast. Vinyl siding cleaning with a soft wash removes green streaks and chalky oxidation without cracking panels or forcing water behind them, which is the main cause of hidden mold inside walls after a careless pressure wash.

• Soft wash, never high pressure
• Green algae and black mildew
• Light oxidation cleaned
• Rinsed top to bottom

Fiber cement siding is tough, but its painted finish is not. Hardie board cleaning uses low pressure and a gentle solution that removes dirt and mildew while protecting the factory paint, so you get a clean finish without the risk of stripping color or damaging the caulk lines.

• Low pressure to protect paint
• Mildew and dirt removed
• Caulk and trim protected
• Ideal before repainting

Older brick homes in Washington, Bath and New Bern need a careful touch, because high pressure can wash out old mortar. Brick and stone cleaning uses the right solution and moderate pressure to remove mildew, dirt and many white efflorescence stains while keeping the mortar joints intact.

• Brick walls, chimneys and steps
• Stone veneer and retaining walls
• Efflorescence treatment
• Mortar joints protected

Clogged gutters overflow onto siding and foundations, and the dark tiger stripes on the outside will not rinse off. Gutter cleaning clears leaves and pine needles so water flows again, and gutter brightening removes those oxidation stripes from the face so your gutters look new from the street.

• Leaves and pine needles removed
• Downspouts flushed
• Tiger stripes brightened
• Debris bagged and hauled

Black streaks on shingles are Gloeocapsa magma, an algae that feeds on the limestone filler in asphalt shingles. The Asphalt Roofing Manufacturers Association warns against high pressure on roofs, so our roof soft washing applies a cleaning solution at low pressure that kills the algae and lets rain finish the job.

• Black streaks and algae treated
• Moss and lichen treated
• No high pressure on shingles
• Gutters and siding rinsed after

Pool decks stay wet, so algae and slick spots build up fast around the coping and drains. Pool deck cleaning removes that growth from concrete, pavers and stone, with careful runoff control so cleaning solution stays out of your pool water.

• Concrete, pavers and stone
• Coping and drain areas
• Slip risk reduced
• Runoff kept out of the pool

Our long humid season in Eastern NC means algae, mold and mildew grow on almost every outdoor surface. Mildew removal works best when the growth is killed, not just rinsed, so we use a soft wash solution that treats the root and keeps surfaces clean longer.

• Siding, trim and shutters
• North walls and shaded areas
• Roofs, decks and fences
• Treatment that lasts longer

Some jobs do not fit one box: outdoor kitchens, retaining walls, mailbox posts, play sets, columns and trim. Exterior surface cleaning covers those extra spots with the right method for each material, so the whole property matches once the main wash is done.

• Retaining and garden walls
• Columns, shutters and trim
• Play sets and outdoor kitchens
• Mailboxes and light posts

Paint and stain only last when they bond to a clean surface. Pre-paint and pre-stain cleaning removes dirt, chalky oxidation, mildew and loose fibers from siding, decks and fences, giving your painter or your own weekend project the best possible start.

• Siding and trim before paint
• Decks and fences before stain
• Mildew killed, not covered
• Surface left to dry fully

A clean building tells customers and tenants that you take care of details. Commercial building pressure washing removes dirt, mildew, spider webs and exhaust film from metal, block, brick and EIFS walls, reaching tall walls safely and using the right pressure for each surface.

• Metal, block, brick and stucco
• Tall walls cleaned safely
• Canopies, signs and awnings
• Scheduled around your hours

Gum, spills and foot traffic stain the concrete right outside your door. Storefront cleaning covers the entry walk, the building face, window frames and awnings, so your shop looks open and inviting to anyone driving past.

• Entry walks and gum removal
• Building face and window frames
• Awnings and signage
• Early morning service

Restaurants deal with grease, food spills and heavy foot traffic every day. Restaurant exterior cleaning covers entrances, patios, walls near exhaust vents, drive-thru lanes and dumpster areas, with degreasers made for food service grime and work timed before you open.

• Entrances and outdoor dining
• Grease near vents and doors
• Dumpster and grease bin areas
• Before or after service hours

Oil drips, gum and tire marks make a parking lot look neglected. Parking lot cleaning targets the stained areas near entries, parking spaces and curbs, with degreasing for oil and a surface cleaner for an even finish across large concrete sections.

• Oil and tire mark treatment
• Curbs, islands and entries
• Large area surface cleaning
• Scheduled around your hours

High-traffic walkways collect gum, spills and black grime that brooms cannot touch. Commercial sidewalk cleaning with a flat surface cleaner lifts it evenly, reduces slip hazards and keeps the path from the lot to your door looking cared for.

• Gum removal
• Entry and exit walkways
• Breezeways and courtyards
• Slip hazards reduced

From loading pads to courtyards, commercial concrete takes a beating. Concrete pressure washing removes dirt, oil, rust and mildew from large flat areas, with stain treatment where needed, so the whole surface looks even instead of patchy.

• Pads, aprons and courtyards
• Oil and rust treatment
• Large area surface cleaning
• Even, uniform finish

Dumpster pads attract flies, rodents and odor complaints. Dumpster pad cleaning and degreasing breaks down the grease and food waste in the concrete, rinses the enclosure walls and gates, and leaves the area cleaner and fresher for staff and neighbors.

• Grease and food waste removed
• Enclosure walls and gates
• Odor reduction
• Recurring service available

Metal buildings and warehouses collect dirt, mildew and oxidation that make them look older than they are. Warehouse exterior cleaning washes metal panels, block walls, overhead doors and canopies with low-pressure methods that protect the painted finish.

• Metal panels and block walls
• Overhead doors and canopies
• Oxidation and mildew
• Painted finish protected

Clients form an opinion in the parking lot. Office building exterior washing cleans walls, entries, columns and walkways so medical offices, banks and professional buildings look sharp and well kept, with work scheduled outside office hours.

• Walls, columns and entries
• Walkways and courtyards
• Scheduled around office hours
• Quarterly plans available

Multi-unit buildings need clean exteriors to keep residents happy and units leasing. Apartment and condo exterior cleaning covers siding, breezeways, stairwells, balconies and walkways, with building-by-building scheduling that keeps disruption low.

• Siding and breezeways
• Stairwells and balconies
• Walkways and pool areas
• Building-by-building schedule

HOAs and property managers need one dependable vendor for many surfaces. HOA cleaning covers clubhouses, pool decks, entrance signs, sidewalks, mailbox kiosks and common area fences, with clear written pricing for board approval and a routine schedule.

• Entrance signs and walls
• Clubhouses and pool decks
• Sidewalks and mailbox kiosks
• Written bids for boards

Outdoor dining decks, hotel patios and rooftop areas see constant use. Commercial deck and patio cleaning removes food stains, algae and grime from wood, composite and concrete, so guests sit down to a clean space.

• Dining decks and patios
• Wood, composite and concrete
• Furniture areas and railings
• Before opening hours

Loading docks collect oil, hydraulic fluid and debris that create slip hazards for staff. Loading dock cleaning degreases the pad, ramps and bumpers and rinses dock doors, helping your team work on a safer surface.

• Oil and fluid degreasing
• Ramps, pads and bumpers
• Dock doors rinsed
• Safer footing for staff

Drive-thru lanes collect oil, spilled drinks and food waste every day. Drive-thru lane cleaning degreases the lane and window area, removes gum and stains, and is timed around your service hours so the line keeps moving.

• Lane and window area
• Oil and spill degreasing
• Curbs and menu board area
• Timed around service

One deep clean looks great, but in our humid climate buildup returns. Routine commercial exterior maintenance puts your sidewalks, dumpster pads, storefront and building on a monthly, quarterly or seasonal schedule, so the property always looks ready for customers.

• Monthly, quarterly or seasonal
• One vendor for every surface
• Consistent pricing
• A set schedule you can plan on